Wall elements (external)

• 18 mm OSB3 or 12 mm OSB3 en 12,5 mm gypsum plasterboard.
• foil.
• 160 mm steelframe C- en U-profiles.
• 160 mm glasswool-insulation.
• 12 mm OSB3.
• 63 mm Kooltherm K8 PIR-insulation (thermal break)
• foil.
• air.
• brick wall or other cladding.

Insulationvalue approx. 8 m2K/W, easy upgrade to 10 or more.

Roof elements

• 18 mm OSB3 or 12 mm OSB3 en 12,5 mm gypsum plasterboard
• foil.
• 250 mm steelframe C- en U-profiles.
• 250 mm glasswool-insulation.
• 12 mm OSB3.
• 63 mm Kooltherm K8 PIR-insulation (thermal break)
• foil.
• wooden batten, vertical, 11 x 32 mm.
• wooden batten, horizontal, 22 x 50 mm.
• rooftiles or structurefoil 8 mm.
• corrugated sheet 40/167-1000.

Insulationvalue approx. 10 m2K/W, easy upgrade to 12 or more.

Floor elements

• drybuild system for floorheating, from solarpower or heatpump.
• floorheatingsystem, Technea or Schlueter BEKOTEC or similar.
• Topfloor insulation 30 mm to create floating floor to avoid sound.
• 18 mm OSB3.
• 250 of 300 mm C-profiles with holes for installation purposes.
• 100 mm insulation in floor element.
• foil.
• wooden batten, horizontal, 22 x 50 mm.
• gypsumplasterboard, thickness 12,5 mm.
• finish.

Depending on the project, it is possible to fully or partially pre-fabricate, or to just deliver profiles as a do-it-yourself kit.

Wall elements (internal)

• 18 mm OSB3 or 12 mm OSB3 en 12,5 mm gypsumplasterboard.
• 75 mm C- en U-profiles.
• 75 mm insulation in wallelement.
• 18 mm OSB3 of 12 mm OSB3 en 12,5 mm gypsumplasterboard.